Utilization requirement and precautions
Please make sure the following issues before you use our matching system
The WORK Wheels Matching Date gives reference value based on actual measurements taken on normal vehicle height and stationary vehicles without occupants.
Beware that these data,Wheel and Tire size,are not implyed that we have the guarantee it can be passed MOT.
The ultimate selection of the production for purchase must be made at your discretion,upon consulting your dealer and our distributor.
Please be forewarned that some cars on web-site and catalogue are not exactly corresponded to our matching date because there are hot-rodded their underbody and fender for display and auto race.
・Reference wheel size
This size is given reference value based on actual measurements taken on normal vehicle height and stationary vehicles without occupants.
therefore various types of hot-rod cars,low down and customized,may not be installed.
Beware that there is possibility to contact with the vehicle body caused as the result of changing specification by car maker’s minor change and individual difference even same vehicle.
Beware that pictures of some car equipped WORK brand wheels on web-site and catalogue are customized so as to portray our concept image,and its not necessarily matching our reference wheel size.
・Reference Tire size
This size is setting based on the allowable range which doesn't have any errors of speedometer and odometer with external diameter of standard installation tires.
Beware that dimensions associated with tire selection are based on the designed profile width of tires.
This could vary depending on the brand of the tires,which could cause the tires to protrude from or contract with the vehicle body.
Beware that it could cause speedometer and odometer to be at variance depending on your selections which are much bigger than standard instauration size.
Beware that some car which is equipped TPMS(Tire Pressure Monitoring System) to Tire and wheel could be operated alarm activation and display repeatedly by inch up and hot-rodded their underbody.
When selecting tires for your vehicle,consult a tire professional for the proper selection of speed symbols and road indexes to make sure the tires are compatible and safe.Otherwise the durability of the tires or the safety of the vehicle could be affected.
・Load index
When tires are changed inch up, please select the correct grade that doesn't fall below the load index(*2) which is displayed on the standard installation tires.
With incorrect tires which falls below the load index, it could cause burst, blowout or another accidents which are one of the most dangerous trouble.
There is possibility it is written the reference tire size in matching guide not considering load index value.
Please understanding in advance.
(*2) The load index is that the tire is allowed to load the maximum mass of indicative index in each tire manufacturers decide regulation proviso.
・Reference disc mark
Reference disk mark is what could be helped when you judge whether the wheels could be fitted without contacting with caliper or not if selecting wheels except our reference.
Beware that there is possibility that expected installation car may have other disk outside of our reference in case it couldn’t have its possible off-est.
Beware that it wouldn’t necessarily match our reference disk if changing brake caliper from standard to outside article
A word of caution,when you install the wheel could be written in matching data, so that please check it before installing.
Before purchasing, please inquire of your dealer and our distributor absolutely.